Tonneau Covers > Installation of Toyota Tacoma Tonneau Covers
Installation of Toyota Tacoma Double Cab (4-Door) Tonneau Covers:
Prior to installation, unpack and inspect all parts and the LT Sport Tonneau Cover for signs of obvious damage.
We have found that 75% of the time you can just use a "phillips" screwdriver to do this. If you cannot loosen them, we suggest a quick trip to your local mechanic to loosen them.
Using a 7/16" wrench, tighten the bolts (yellow arrows) while
ensuring the female hinge is pushed all the way forward and down against
the front rail (green arrows).
Make sure the draw down bracket is pushed all the way to the rear (green
and then tighten the bolts (yellow arrows). Make sure the bolts for the
draw down are left "loose", (blue-arrows) they will be tightened later.
Using another person to help you, insert the tonneau cover into the opening of the female hinges. If it doesn't quite fit, loosen the nuts on the 'male' hinges and spread them out to the appropriate width.
You can always adjust this later if it doesn't quite fit the first time....
With the tailgate open, try opening and closing the tonneau cover. If the rods are not adjusted to the correct length, you may adjust them with an 1/8" Allen Wrench (not provided).
Back to the Tonneau Covers for Toyota Tacoma
Call us for more details